35 Ton Amada RG-3512LD press brake
Manufactured in March of 1999
Installed new by Amada in September of 2000
The Amada RG LD press brake series combines the proven Amada RG press brake with a simple user friendly control and backgauge. This machine is a RG-3512-LD with a 4′ bed perfect for bending small parts.
Maximum bend length: 49.21”
Press capacity: 39 US tons
Vertical stroke of lower beam: 3.937”
Rising speed of lower beam (in. /sec) at 60Hz: 2.992”
Bending speed of lower beam (in. /sec) at 60Hz: 0.520”
Lowering speed of lower beam (in. /sec) at 60Hz: 1.575”
Number of cylinders: 1
Hydraulic unit tank capacity, (US Gal): 10
Machine weight (US Tons): 2.0
Position command method: Absolute value method
Number of controlled axes: 2 Axes (D, L)
D axis: Teaching with HANDWHEEL, and data entry with numeric keys (MDI mode)
L axis: Data entry with numeric keys
Least input increment
D axis: 0.0004 in.
L axis: 0.001in.
Display method: 7-segment LED
D axis: Encoder
L axis: Encoder
Memory capacity: 99 steps in L-ONLY mode and 99 steps in MDI mode or 198 steps in total
D axis: 200-w DC motor
L axis: 200-w DC motor
D axis: Tool origin set by aligning tools
L axis: Origin automatically set ORIGIN START button
Alarm display: Operational mistake and error are displayed by number
Ambient temperature: 32 to 104 degrees F
Ambient humidity: Maximum of 75% (relative humidity) without dew condensation
D Axis: 0.01 to 0.60 in. /sec
L Axis: 590.55 in. /min
D Axis: 0 to 3.937 in.
L Axis: 0 to 19.685 in.
Stopper height: 1.969 to 7.087 in.
D axis: +/- 0.0004 in.
L axis: +/- 0.0060 in.